Sturdy side protection dampers, manufactured from heavy duty polymer and metal bracket.
Frame Slider Sets are black molded nylon sliders on metal mounting brackets and feature the Kawasaki logo All mounting hardware and instructions included Note: Frame Sliders help protect your motorcycle, but will not prevent all types of damage
Help protect your engine shrouds from tip-over damage High-density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory-designed metal brackets Includes required brackets, hardware and installation instructions Note: Frame Sliders help protect your motorcycle but will not prevent all types of damage
Semi-transparent adhesive gel resin fuel Tank Pad helps to protect paint finish from potential scratches and ordinary wear and tear Die cut design to fit the contour of the fuel tank
Help protect your tank’s paint finish from scratches and ordinary wear and tear with this Knee Pad Set Made with textured non-slip vinyl
Semi-transparent adhesive gel resin fuel Tank Pad helps to protect paint finish from potential scratches and ordinary wear and tear
Die cut design to fit the contour of the fuel tank
Add even more protection with front axle sliders. These axle sliders help to prevent damage to your front axle, front axle nut, fork bottoms, and brake callipers. This product helps to protect your motorcycle, but will not prevent all types of damage.
Add even more protection with front axle sliders. These axle sliders help to prevent damage to your front axle, front axle nut, fork bottoms, and brake calipers. This product helps to protect your motorcycle, but will not prevent all types of damage.
Help protect your tank’s paint finish from scratches and ordinary wear and tear Made with textured non-slip vinyl
Stylish trim helps protect the radiator from road debris with rugged metal guard Laser-cut pattern offers increased airflow while adding minimum weightStylish trim helps protect the radiator from road debris with rugged metal guard Laser-cut pattern offers increased airflow while adding minimum weight
Stylish radiator trim helps protect your radiator from road debris with rugged metal guards Laser-cut pattern offers maximum airflow while adding minimal weight
Sturdy side protection dampers, manufactured from heavy duty polymer and metal bracket.
Help protect your engine shrouds from tip-over damage with this Frame Slider Set High-density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory-designed metal brackets Includes required brackets, hardware and installation instructions Note: Frame Sliders help protect your motorcycle but will not prevent all types of damage
Stylish and streamlined sliders, to help prevent damage in case of a spill. Tested and approved to factory standards. Shroud Slider Z900 99994-1350 /Z901 The engine guards help to protect your motorcycle, but will not prevent all types of damage.
Stainless steel radiator guard for design or protecion. Mesh in chrome. Kawasaki branded product.
Help protect your engine shrouds from tip-over damage High-density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory-designed metal brackets Includes required brackets, hardware and installation instructions Note: Frame Sliders help protect your motorcycle but will not prevent all types of damage
Manufactured from ABS nylon, the functional yet stylish and compact design of these front axle sliders adds an extra level of protection to your bike, and helps guard your forks from possible tip-over damage With instructions and all necessary mounting hardware included, additional protection can be added to your bike Note: Front Axle Sliders help protect your motorcycle, but will not prevent all types of damage
Stylish high-density black ABS plastic frame slider pads with aluminium insert and Kawasaki logo. Gives extra protection for bodywork.
Help protect your radiator from road debris with rugged metal guards featuring an exclusive laser-cut Kawasaki logo Laser-cut pattern offers maximum airflow while adding minimal weight
Helps protect the engine from tip-over damage High-density black ABS plastic Frame Slider Set features the Kawasaki logo and is mounted with factory-designed metal brackets Includes required brackets, hardware and installation instructions Note: Frame Sliders help to protect the motorcycle but will not prevent all types of damage
Screen protector for your digital dashboard. Will protect the screen against scratches.
Help protect your engine from tip-over damage High-density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory-designed metal brackets Includes required brackets, hardware and installation instructions NOTE: Frame Sliders help protect your motorcycle but will not prevent all types of damage
Help protect the engine from tip-over damage High-density black ABS plastic Frame Slider Set features the Kawasaki logo and is mounted with factory-designed metal brackets Includes required brackets, hardware and installation instructions Note: Frame Sliders help protect the motorcycle but will not prevent all types of damage
Stylish Radiator Trim helps protect your radiator from road debris with rugged metal guards Laser-cut pattern offers increased airflow while adding minimal weight
Helps protect the engine from tip-over damage High-density black ABS plastic Frame Slider Set features the Kawasaki logo and is mounted with factory-designed metal brackets Includes required brackets, hardware and installation instructions Note: Frame Sliders help to protect the motorcycle but will not prevent all types of damage
ABS nylon sliders provide abrasion protection All mounting hardware and instructions included Note: Front Axle Sliders help protect your motorcycle, but will not prevent all types of damage
Stylish trim helps protect the radiator from road debris with rugged metal guard Laser-cut pattern offers increased airflow while adding minimum weight
Clutch cover plate (Chrome)
99994-0580 /Vulcan S
Centre cap for clutch cover plate
999940600 /Vulcan S
Aluminium centre cap with Kawasaki logo for clutch cover plate .
Will fit original bike clutch cover plate, or accessory chrome clutch cover plate.
Help protect paint finish from scratches and wear with this tank pad Made from semi-transparent adhesive gel resin Kawasaki logo featured in an aggressive all-over print Easy adhesive installation
Stylish 3-piece set of covers, to accentuate the jagged-edge design of the bike’s crankcase, clutch and alternator covers.
Help protect your engine cases from tip over damage with this Crankcase Protector Two individual protectors feature hi-strength adhesive backing for easy installation on the clutch (14093-0571) and alternator (14093-0573) Sleek and stylish design for an integrated fit Manufactured from high density black ABS plastic Branded with the Kawasaki logo Note: Crankcase Protectors help protect your motorcycle, but will not prevent all types of damage
Semi-transparent adhesive gel resin fuel tank pad helps to protect paint finish from potential scratches and ordinary wear and tear Die cut design to fit the contour of the fuel tank, this tank pad installs easily and stays in place for the long haul
Tank pad to protect the paint on the tank from scratches, made by mainly the zipper of your jacket.
Soft injection molded plastic pad helps protect paint finish from potential scratches and ordinary wear and tear Tank Pad is designed to fit the contour of the fuel tank
Front Axle Slider 99994-1134 /Versys 1000 Add more protection with front axle sliders. These axle sliders help to prevent damage to your front axle, front axle nut, fork bottoms, and brake calipers.
Help protect your vehicle’s bodywork with sturdy Kawasaki branded Frame Sliders Slide pads are made from polyurethane plastic for increased durability Note: Frame Sliders help protect your motorcycle but will not prevent all types of damage
Printed adhesive gel resin tank pad helps protect finish from scratches and wear Exclusive Kawasaki logo
Help protect your engine shrouds from tip-over damage with this Frame Slider Set High-density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory-designed metal brackets Includes required brackets, hardware and installation instructions Note: Frame Sliders help protect your motorcycle but will not prevent all types of damage
Sturdy side protection dampers, manufactured from heavy duty polymer and metal bracket. The engine guards help to protect your motorcycle, but will not prevent all types of damage.
Help protect your engine shrouds from tip-over damage High-density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory-designed metal brackets Includes required brackets, hardware and installation instructions Note: Frame Sliders help protect your motorcycle but will not prevent all types of damage
Stylish Radiator Screen helps protect your radiator from road debris with rugged metal guards Laser-cut pattern offers increased airflow while adding minimal weight
Purchase as a required component to mount Gear Position Indicator (99994-0540), DC Power Outlet (99994-0541), LED Light Bar (99994-0511), or other electrical accessories
The chrome finish of the LED Light Bar complements your bike’s style and integrates easily into the front headlight area with simple plug and play installation Reflector Facing Technology (RFT) allows for optimum LED output while consuming far less power than conventional LED or halogen bulbs Steel bracket with plastic light housing All necessary wiring and hardware to mount light bar included Requires Relay Kit (99994-0510), sold separately
Rugged and aerodynamic dual LED Light Bar provides additional lighting for improved visibility Integrates into the front headlight area Reflector Facing Technology (RFT) allows for optimum LED output while consuming far less power than conventional LED or halogen bulbs Steel bracket with high-impact plastic light housings
LED indicator kit Front & Rear including relay 99994-1263 /Z651 Slimline LED indicator kit to replace the front and rear indicators. Including relay.
Rugged and aerodynamic dual LED Light Bar provides additional lighting Integrates into the front headlight area Reflector Facing Technology (RFT) allows for optimum LED output while consuming far less power than conventional LED or halogen bulbs Steel bracket with high-impact plastic light housings • Dealer installation recommended MY15-MY21 requires Relay Kit (99994-0556), sold separately MY22+ requires Relay Kit (99994-1678), sold separately
Tank stripe decal Anthracite (For black) 99994-0596 /Vulcan S Tank stripe decal Silver (For non-black) 99994-0597 /Vulcan S Sporty tank stripe kit for your Kawasaki Vulcan S Kawasaki triple stripe design vinyl decal is made with high-grade adhesive and finished with clear coat for a sleek, durable upgrade. Anthracite color tank stripe kit (For black bike), Silver color tank stripe kit (For non black bike)
Tank stripe decal Anthracite (For black) 99994-0596 /Vulcan S Tank stripe decal Silver (For non-black) 99994-0597 /Vulcan S Sporty tank stripe kit for your Kawasaki Vulcan S Kawasaki triple stripe design vinyl decal is made with high-grade adhesive and finished with clear coat for a sleek, durable upgrade. Anthracite color tank stripe kit (For black bike), Silver color tank stripe kit (For non black bike)
Black clutch cover plate with aluminium colored insert with Kawasaki logo.
"Stylish wheel rim tape to complete the look of your bike. (Set of 4 rings for 1 bike)
[Components] ・SEAL-OIL x 1pc ・BOLT, SOCKET x 4pcs ・O RING, 60mm x 1pc ・VALVE x 1pc
Chrome finished Grab Bars for the Z900RS.
Suitable with the Standard seat and the Low seat (99994-1022).
The Grab bars can not be installed in conjunction with the Side grips for Z900RS.
Make moving your Z900 RS motorcycle onto the Center Stand (99997-1017), sold separately, a bit easier with this Grab Handle Set Made from durable chrome plated steel Includes all required hardware
Indicator cover for Z650RS This indicator cover is mounted under the Dual-Dial Instrumentation with Multi-Function LCD
Oil filler cap available in the color: Aluminum Black Gold Replaces the original Oil filler cap.
Historic Z900 Kawasaki Tank Emblem enhances the retro look of the Z900 RS motorcycle
Enhance the sporting appearance of the bike! All factory standard colours available. Replaces the passenger seat.
Adjustable Front Fork Caps. Available in the colors gold and black Fork cap Black Z900RS 99994-1019 /Z900 RS Fork cap Gold Z900RS 99994-1108 /Z901 RS
Indicator cover for Z650RS
This indicator cover is mounted under the Dual-Dial Instrumentation with Multi-Function LCD
Available in aluminium and black.
99994-1016 /Z650 RS – Indicator Cover Aluminium
99994-1220 /Z650 RS – Indicator Cover Black
CNC machined billet aluminum Oil Filler Cap with black, gold, or silver finish Oil O-ring included
Give your motorcycle a custom appearance with this unique seat cowl Constructed of ABS plastic and features factory matched paint Replaces stock rear seat Includes all necessary hardware
Stylish Radiator Trim helps protect your radiator from road debris with rugged metal guard Stylish laser-cut pattern offers maximum airflow while adding minimum weight
Marchesini lightweight front wheel kit. Contains: 1x WHEEL-ASSY,FR,M.BLACK+GREEN STRIPE (Marchesini Forged Alu.) 2x BRAKE DISC,FR,BLACK+BLK 1x ROTOR, FR WHEEL (ABS sensor ring front) 10x BOLT FOR ABS sensor/brake disc front 2x VALVE (side) (Aluminium)
Two classic white “KAWASAKI” emblems as a replacement for the standard Kawasaki emblems.
Give your motorcycle a custom appearance with these unique seat cowls Each cowl is constructed of ABS plastic and features color matched paint
Give your motorcycle a custom appearance with these unique seat cowls Each cowl is constructed of ABS plastic and features color matched paint Includes all necessary hardware
Enhance the sporting appearance of the bike!
All factory standard colours available.
Replaces the passenger seat.
*Can not be used in conjunction with a top case and top case bracket.
Pillion seat cover (17K) Metallic Diablo Black
99994-0897-17K /Ninja 1000 SX
Pillion seat cover (60R) Emerald Blazed Green
99994-0897-60R /Ninja 1001 SX
Help protect the tank paint finish from scratches and ordinary wear and tear Made with textured non-slip vinyl Adds stylish black accent to vehicle
Relay for accessories (lightbar/sub lamp/12V outlet/Gear postion indicator)
99994-0510 /Vulcan S
DC Socket (12V outlet) (Relay 999940510 required)
99994-0541 /Vulcan S
12 Volt DC power socket with bracket and cap for tailor made fitment to the Vulcan S instrument panel.
Requires additional relay.
Mount your GPS for minimal vibration and maximum convenience The flat mounting surface is designed to position the GPS within the rider’s direct line of sight above the instrument panel Pre-drilled holes assists with mounting most Garmin® GPS models All necessary brackets and hardware included GPS not included
Fitting kit for TomTom 400/500 series (4xx/5xx) 195NAE0002 /Versys 1000 Fitting kit for TomTom Rider 1 and Garmin Zumo 550 / 660 195NAE0003 /Versys 1000 TomTom Rider 550 195NAE0004 /Versys 1000 GPS Bracket 99994-0973 /Versys 1000 Solid, easy to install bracket for your navigation system. With rubber bushes to protect your GPS system from vibrations. Fits most common current navigation systems.
Charge your portable devices on the go with a 12-volt DC Power Outlet Installs directly into the available knock-out port on the Ninja® 400 motocycle dash panel Dealer installation recommended 12 Volt DC power socket mounts to the inside left fairing area Requires Relay Kit (99994-1728) sold separately
Charge your portable devices on the go with a 12-volt DC Power Outlet • Installs directly into the available knock-out port on the Z900 motocycle dash panel • Dealer installation recommended • 13 Volt DC power socket mounts to the inside left fairing area
Charge your USB devices on the go with a USB Socket Kit
Installs directly under the seat
12 volt input with 5 volt - 4.3 amp, output port
Dealer installation recommended
Charge your portable devices on the go with a 13-volt DC Power Outlet Installs directly into knock-out port on the dash panel
Charge your USB devices on the go with a USB Socket Kit Installs directly under the seat 12 volt input with 5 volt - 4.3 amp, output port
Charge your USB devices on the go with a USB Socket Kit Installs directly under the seat 12 volt input with 5 volt - 4.3 amp, output port
“USB-A female 6V output for underneath the rear seat to charge your phone or other electric devices.
Charge your portable devices on the go with a 13-volt DC Power Outlet Installs directly into knock-out port on the dash panel
Charge your USB devices on the go with a USB Socket Kit
Charge your portable devices on the go with a 12-volt DC Power Outlet Installs directly into one of two available knock-out ports on the Versys® dash panel Dealer installation recommended Versys® 650/Versys® 650LT require Relay Kit (99994-0556) or (99994-1677), sold separately
Fog LED Lights Kit
Homologated for road use.
NOTE:
This kit does not operate without the relay kit (sold separately).
Please check your local road regulations when to use.
Purchase as a required component to mount DC Power Outlet (99994-1113) or other electrical accessories, sold separately Only one Relay Kit required per Ninja 401 motorcycle
Charge your USB devices on the go with a USB Socket Kit Installs directly under the seat 12 volt input with 5 volt – 4.3 amp, output port Dealer installation recommended
Charge your USB devices on the go with a USB Socket Kit • Installs directly under the seat 12 volt input with 5 volt - 4.2 amp, output port Requires Relay Kit (99994-1678), sold separately Dealer installation recommended
Charge your USB devices on the go with a USB Socket Kit
Installs directly under the seat
12 volt input with 5 volt - 4.2 amp, Type C output port
Requires Relay Kit (99994-1728)
Dealer installation recommended
Factory designed Öhlins Steering Damper has 18 adjustable settings (clicks) for great tunability and control All necessary brackets and mounting hardware included Installation requires tamper-proof Torx® socket tool Closed course use only
Tie rod, Longer, 230mm. To mount left Vulcan S adjustable footpeg in the forward position (Extended reach) Tie rod, longer, 230mm, for adjustable footpeg LH 99994-0659 /Vulcan S
Tie rod, shorter, 205mm. To mount left Vulcan S adjustable footpeg in the rearward position (Easy Reach) Tie rod, shorter, 205mm for adjustable footpeg LH 99994-0693 /Vulcan S
Most items ship to dealer within 5-7 business days for free. Special dealer only items may be excluded. Additional shipping charges apply to qualified ship to home orders. Price and specifications are subject to change without notice or liability. Availability is subject to production, stocking and demand.
Durable ABS Construction 40 Liter Top Case
Lockable with quick-release base
Approx. 40 liter capacity (fits one full face helmet size large)
Requires Top Case Panel (99994-1494-xx*), Fitting Kit (99994-1495), and One Key System (99994-1496), sold separately
*Choose the best colour option for your bike
Top case 40L
99994-1493 /Versys 650
Cover for topcase 40L (51P Candy Lime Green Type3)
99994-1494-51P /Versys 650
Cover for topcase 40L (660 Metallic Spark Black)
99994-1494-660 /Versys 650
Lock Cylinder (one inner cut key lock)
99994-1496 /Versys 650
Top case 40L Fitting kit (Black)
99994-1683-18R /Versys 651
Semi rigid Nylon tank bag specially designed for the fuel tank shape.
Black/Grey tank bag with reflective piping and Kawasaki logo.
Clear Pocket at top of tank bag with hole for earphone from smartphone or navigation.
Inside has partitions to prevent goods moving around.
Including shoulder belt and rain cover with transparent window.
L350mm, W223mm,H150mm, Load Weight Max 2kg, Load Capacity approximate 4 Litre.
A matching bracket is required for fitment.
Tank bag (4 Litre)
99994-0803 /Z900
Bracket for tank bag (Z900)
99994-0986 /Z901
Keep your personal items safe and secure in 47 liters of lockable, waterproof storage; enough room for two full face helmets
Kawasaki’s One Key System allows you to key the lock to your ignition key
Kawasaki logos and factory-matched trim give your bike a customized look
Durable molded ABS construction
KQR™ mounting system allows for easy installation or removal once installed so you can be ready for any adventure the road brings
Requires Bracket (99994-0842), Base Plate (99994-0662), One Key System (99994-0528), Color Panel, and Trim all sold separately
Backrest Pad (99994-0494) and Top Case Liner (100LUU-0005) also sold separately
Dealer installation is required
Top Case load limit is 5kg (11 lbs.)
Dimensions 432mm (17”) L x 584mm (23”) W x 305mm (12”) H
Semi rigid polyester tank bag specially designed for the fuel tank shape Black/Grey tank bag with reflective piping and Kawasaki logo Clear pocket at top of tank bag with hole for earphone from smartphone or navigation Inside has partitions to prevent goods from moving around Includes shoulder belt and rain cover with transparent window L350mm, W223mm,H150mm, Load Weight Max 2kg, Load Capacity approximate 4 Liters A matching bracket is required for fitment Z H2 (99994 1389), Z900 (99994-0986), and Ninja 400 (99994-1045)
Durable ABS Construction 40 Liter Top Case Lockable with quick-release base Approx. 40 liter capacity (fits one full face helmet size large) Requires Top Case Panel (99994-1494-xx*), Fitting Kit (99994-1495), and One Key System (99994-1496), sold separately *Choose the best colour option for your bike Top case 40L 99994-1493 /Versys 650 Cover for topcase 40L (51P Candy Lime Green Type3) 99994-1494-51P /Versys 650 Cover for topcase 40L (660 Metallic Spark Black) 99994-1494-660 /Versys 650 Lock Cylinder (one inner cut key lock) 99994-1496 /Versys 650 Top case 40L Fitting kit (Black) 99994-1683-18R /Versys 651
Durable tubular steel chrome finish construction mounts securely to the rear chassis
Helmet lock kit that works with the original bike key and is fitted to the rear frame. (Dealer installation required)
Conveniently lock your helmet when you’re off the road Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key Steel construction All required brackets and hardware included
Conveniently lock your helmet when you’re off the road Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking Steel construction
Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use the ignition key for unlocking Steel construction All required brackets and hardware included Dealer installation required
Bolt-on helmet lock. Lock rotor can be assembled to fit the existing ignition key. (One-Key system)
Lock your helmet conveniently when you’re off the road Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key Steel construction All required brackets and hardware included Dealer installation required
Conveniently lock your helmet when you’re off the road Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking Steel construction Dealer installation required
Bolt-on helmet lock. Lock rotor can be assembled to fit the existing ignition key. (One-Key system)
ERGO-FIT® reduced reach seat reduces the seat height 8mm (3/10") and has a narrowed front, facilitating the reach to the ground for increased confidence and comfort The seat leather is the same cold-resistant, high-elasticity-type material used on the standard seats Made to fit and complement the Ninja® 1001 motorcycle Includes all necessary hardware Utilizes factory seat base
ERGO-FIT® reduced reach seat reduces the seat height by 25mm (1") and has a narrowed front The seat vinyl is the same cold-resistant, high-elasticity-type material used on the standard seats Made to fit and complement the Z901 RS motorcycle
ERGO-FIT® Extendend Reach Seat increases the seat height by 25mm (1") The seat vinyl is the same cold-resistant, high-elasticity-type material used on the standard seats Made to fit and complement the Z651 RS motorcycle
Large windscreen smoke for better wind protection for more comfort and improved looks. This screen is approximately 20 mm higher and 41 mm wider then the original windscreen. Kawasaki branded product, produced and developed by Kawasaki and fully road legal.
Sporty windscreen constructed of scratch resistant polycarbonate offers a great look and additional wind protection 20mm (3/4") taller and 40mm (1 1/3") wider than stock windscreen
Smoke winsdshield that is 55mm lower than original. For a sporty look and good wind protection. Parabrezza fumè sport 56mm piu basso rispetto a quello di serie, che offre un eccellente protezione dal vento e dona alla vostra Kawasaki un nuovo look.
Clear touring screen is 150 mm (6”) wider and 80 mm (3”) taller than the stock windshield Made with optically correct polycarbonate plastic Central air vent enhances air management Kawasaki logo for a factory appearance Tall Windshield is standard on 2019 Versys® 1001 SE LT+ motorcycles
Larger Meter Cover raises airflow from the front cowl while maintaining an overall aggressive appearance Manufactured from slightly translucent black high density ABS plastic 51mm (2”) wider and 102mm (5”) higher than stock meter cover Includes required brackets, hardware, and installation instructions
This large touring windshield gives improved wind protection and comfort. It is 9cm higher and 4cm wider than original windshield and has a spoiler edge to direct wind flow upwards.
Windshield touring large, Clear (W=+4cm, H=+9cm)
99994-1371 /Ninja 651
Larger Meter Cover raises airflow from the front cowl while maintaining an overall aggressive appearance Manufactured from high density ABS plastic 51mm (2”) wider and 102mm (5”) higher than stock meter cover Includes required brackets, hardware, and installation instructions
Large clear windscreen, designed to provide additional rider comfort. This screen is approximately 25 mm higher than the standard mounted windscreen.
Most items ship to dealer within 5-8 business days for free. Special dealer only items may be excluded. Additional shipping charges apply to qualified ship to home orders. Price and specifications are subject to change without notice or liability. Availability is subject to production, stocking and demand. Manufacturer's suggested retail prices shown.
Smoke winsdshield in the same shape and size as original. With cutout for Auto High Beam sensor. For a sporty look and good wind protection. For 2024 modelyear onwards.
Special design large windshield in grey smoke colour for better wind protection and improved looks. This screen is approximately 50mm higher and 70mm wider (35+36mm) than the original windshield for more comfort.
Sporty windscreen constructed of scratch resistant polycarbonate offers a great look and additional wind protection 20mm (3/4") taller and 40mm (1 1/3") wider than stock windscreen
Scratch-resistant clear windshield, designed to provide additional rider comfort 6cm (60 mm) wider and 10cm (100 mm)higher than standard windshield Maximum adjustable range up through down is 6 cm (60 mm) Windshield Bracket Kit (99994-1690) required for installation, sold separately
Two-piece Gel Seat provides long-distance support and comfort for rider and passenger 15mm increased driver seat heigh over stock Gel insert in both sections evens out seating pressure Cover construction features low-heat gain material allowing for significantly reduced heat absorption after long periods of sun exposure Seat cover features contrasting side material and stitching with Kawasaki logo 101% complete for replacement of the stock seat
Help keep your hands warm on the road with an ergonomically designed grip heater system to minimize added bulk to the grip Adjusts between low, medium and high settings with the touch of a button Indicator light improves setting visibility Grip set with all required wiring, brackets and hardware
Heated grips ZX-10R/RR 99994-1486 /Ninja ZX-10R Stylish grip heater with all-around heating and integrated control button with light in the grip itself. There is an automatic battery saver function. If the battery voltage drops while using the grip heater, the grip heater turns off and the indicator light blinks. The grips feature 3 temperature levels (100%, 60%, 21%, Off).
Made to fit and complement the Z H2 motorcycle, this seat enhances riding comfort for taller riders The ERGO-FIT® Extended Reach Passenger Seat is 10mm (2/6”) taller than stock and comes fully assembled Utilizes factory seat base and components for a factory fit PVC foam with vinyl cover
Made to fit and complement the Z900 motorcycle, this seat enhances riding comfort for taller passengers. This ERGO-FIT® Extended reach passenger comfort seat is 21mm higher than the standard passenger seat.
ERGO-FIT® Extended Reach Seat increases the seat height by 25mm (1") The seat vinyl is the same cold-resistant, high-elasticity-type material used on the standard seats Made to fit and complement the Z651 RS motorcycle • Includes all necessary hardware
Tie-rod L=180 mm. Shorter. For adjustable footpeg LH 39111-0336 /Vulcan S Easy Reach Handlebar black with grip (36mm closer) 99994-0827 /Vulcan S Easy Reach Seat front (reduced reach seat) (ACC-0162) 99994-1559 /Vulcan S ERGO-FIT™ Reduced Reach (Suggested for riders shorter than 170cm. ) A combination of adjustable factory components and accessories reduce the reach to handlebars and footpegs for the best possible fit. Step1: Ergo-Fit 3 position footpegs can be adjusted 25mm closer to your body with shorter accessory tie rod, for maximum comfort and confidence. Step2: Ergo-Fit Accessory handlebar decreases reach by 36mm. Handlebar levers are positioned inwards for smaller hands. Original brake and clutch lever can be adjusted. Step3: Ergo-Fit The Easy Reach seat moves you forward ± 54mm. Additionally, the slimmer tapered seat profile allows the rider to reach the ground better.
This low seat is slimmer which makes it easier to touch the ground whilst standing still. For the MY17-MY19 Z1000SX it is 8 mm lower then the original seat. For the MY20-> Ninja 1000SX it is 29 mm lower then the original seat.
Help protect the tank paint finish from scratches and ordinary wear and tear Made with textured non-slip vinyl Adds stylish black accent to vehicle
Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip Adjust to low, medium, or high settings with the touch of a button Indicator light on the left grip improves setting visibility Grip Heater Set with all required wiring, brackets and hardware
Genuine plastic handguards to increase protection and comfort. Comes as a set; left and right.
Grip Heater Set replaces stock grips and throttle Requires Relay Kit (99994-1678) sold separately
Comfort Seat provides long-distance support and comfort for rider and passenger Gel insert evens out seating pressure Stylish carbon fiber pattern Complete replacement of the stock seat Uses factory seat base and components for a factory fit
Made to fit and complement the Ninja® ZX™-5RR motorcycle, this seat features firm urethane cushioning which enhances feel to the rear wheel traction during sport riding sessions Utilizes factory seat base and components for a factory fit Includes all parts needed to replace the stock seat
ERGO-FIT Reduced Reach Seat reduces the seat height by 20mm (.79") and has a narrowed front The seat vinyl is the same cold-resistant, high-elasticity-type material used on the standard seats Made to fit and complement the Eliminator motorcycle Includes all necessary hardware
Give your passenger additional comfort with this classic style Passenger Grab Bar Made from chrome plated steel Includes all required hardware
Give your passenger additional comfort with this classic style passenger grab bar Made from durable chrome plated steel
Made to fit and complement the Ninja 500 motorcycle, this seat enhances riding comfort for taller riders The ERGO-FIT extended reach seat is 25mm (2”) taller than stock and comes fully assembled Utilizes factory seat base and components for a factory fit PVC foam with vinyl cover Includes all parts needed to replace the stock seat
Hand cover set 99994-1135 /Versys 1001 Genuine plastic handguards to increase protection and comfort. Comes as a set; left and right.
Keep your hands warm on the road with an ergonomically designed heat system to minimize added bulk to the grip Adjusts between low, medium and high settings with the touch of a button Indicator light improves setting visibility Rubber grips with metal brackets Grip set with all required wiring, brackets and hardware
Up and down quick shifter. Standard for Versys 1000 S and Versys 1001 SE Requires dealer support with KVCI tool to enable quickshifter in bike ECU. Please ask your local dealer.
Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip Adjust to low, medium, or high settings with the touch of a button Indicator light on the left grip improves setting visibility Grip set with all required wiring, brackets and hardware
ERGO-FIT™ low front seat that is 20mm lower than the original seat. It will give an easy reach to the ground. (Total seat height with this seat is 801mm)
Metal bracket with chrome finish LED spotlamps with low power consumption. For increased visibility. Bar available in black. (Requires additional relay)
Ideal for maintenance, this forged center stand mounts permanently to your motorcycle
Conveniently store your U-Lock by installing this U-Lock Bracket under your seat
Mounts U-Lock 210MM (178LOS-0001) or U-Lock 270MM (178LOS-0004), sold separately
Steel brackets with PVC foam cushions
Installation requires drilling holes in fender
Dealer installation recommended
Stylish wheel rim tape to complete the look of your bike. (Set of 4 rings for 1 bike)
Printed adhesive gel resin tank pad for the Z400 helps protect finish from scratches and wear. Exclusive Kawasaki logo, Compatible Models: Z400 ABS 2021,2019,2020,2022 Compatible Models: Z401 ABS
