Relay for accessories (lightbar/sub lamp/12V outlet/Gear postion indicator)
99994-0510 /Vulcan S
DC Socket (12V outlet) (Relay 999940510 required)
99994-0541 /Vulcan S
12 Volt DC power socket with bracket and cap for tailor made fitment to the Vulcan S instrument panel.
Requires additional relay.
Mount your GPS for minimal vibration and maximum convenience The flat mounting surface is designed to position the GPS within the rider’s direct line of sight above the instrument panel Pre-drilled holes assists with mounting most Garmin® GPS models All necessary brackets and hardware included GPS not included
Fitting kit for TomTom 400/500 series (4xx/5xx) 195NAE0002 /Versys 1000 Fitting kit for TomTom Rider 1 and Garmin Zumo 550 / 660 195NAE0003 /Versys 1000 TomTom Rider 550 195NAE0004 /Versys 1000 GPS Bracket 99994-0973 /Versys 1000 Solid, easy to install bracket for your navigation system. With rubber bushes to protect your GPS system from vibrations. Fits most common current navigation systems.
Charge your portable devices on the go with a 12-volt DC Power Outlet Installs directly into the available knock-out port on the Ninja® 400 motocycle dash panel Dealer installation recommended 12 Volt DC power socket mounts to the inside left fairing area Requires Relay Kit (99994-1728) sold separately
Charge your portable devices on the go with a 12-volt DC Power Outlet • Installs directly into the available knock-out port on the Z900 motocycle dash panel • Dealer installation recommended • 13 Volt DC power socket mounts to the inside left fairing area
Charge your USB devices on the go with a USB Socket Kit
Installs directly under the seat
12 volt input with 5 volt - 4.3 amp, output port
Dealer installation recommended
Charge your portable devices on the go with a 13-volt DC Power Outlet Installs directly into knock-out port on the dash panel
Charge your USB devices on the go with a USB Socket Kit Installs directly under the seat 12 volt input with 5 volt - 4.3 amp, output port
Charge your USB devices on the go with a USB Socket Kit Installs directly under the seat 12 volt input with 5 volt - 4.3 amp, output port
“USB-A female 6V output for underneath the rear seat to charge your phone or other electric devices.
Charge your portable devices on the go with a 13-volt DC Power Outlet Installs directly into knock-out port on the dash panel
Charge your USB devices on the go with a USB Socket Kit
Charge your portable devices on the go with a 12-volt DC Power Outlet Installs directly into one of two available knock-out ports on the Versys® dash panel Dealer installation recommended Versys® 650/Versys® 650LT require Relay Kit (99994-0556) or (99994-1677), sold separately
Fog LED Lights Kit
Homologated for road use.
NOTE:
This kit does not operate without the relay kit (sold separately).
Please check your local road regulations when to use.
Purchase as a required component to mount DC Power Outlet (99994-1113) or other electrical accessories, sold separately Only one Relay Kit required per Ninja 401 motorcycle
Charge your USB devices on the go with a USB Socket Kit Installs directly under the seat 12 volt input with 5 volt – 4.3 amp, output port Dealer installation recommended
Charge your USB devices on the go with a USB Socket Kit • Installs directly under the seat 12 volt input with 5 volt - 4.2 amp, output port Requires Relay Kit (99994-1678), sold separately Dealer installation recommended
Charge your USB devices on the go with a USB Socket Kit
Installs directly under the seat
12 volt input with 5 volt - 4.2 amp, Type C output port
Requires Relay Kit (99994-1728)
Dealer installation recommended