Two-piece Gel Seat provides long-distance support and comfort for rider and passenger 15mm increased driver seat heigh over stock Gel insert in both sections evens out seating pressure Cover construction features low-heat gain material allowing for significantly reduced heat absorption after long periods of sun exposure Seat cover features contrasting side material and stitching with Kawasaki logo 101% complete for replacement of the stock seat
Help keep your hands warm on the road with an ergonomically designed grip heater system to minimize added bulk to the grip Adjusts between low, medium and high settings with the touch of a button Indicator light improves setting visibility Grip set with all required wiring, brackets and hardware
Heated grips ZX-10R/RR 99994-1486 /Ninja ZX-10R Stylish grip heater with all-around heating and integrated control button with light in the grip itself. There is an automatic battery saver function. If the battery voltage drops while using the grip heater, the grip heater turns off and the indicator light blinks. The grips feature 3 temperature levels (100%, 60%, 21%, Off).
Made to fit and complement the Z H2 motorcycle, this seat enhances riding comfort for taller riders The ERGO-FIT® Extended Reach Passenger Seat is 10mm (2/6”) taller than stock and comes fully assembled Utilizes factory seat base and components for a factory fit PVC foam with vinyl cover
Made to fit and complement the Z900 motorcycle, this seat enhances riding comfort for taller passengers. This ERGO-FIT® Extended reach passenger comfort seat is 21mm higher than the standard passenger seat.
ERGO-FIT® Extended Reach Seat increases the seat height by 25mm (1") The seat vinyl is the same cold-resistant, high-elasticity-type material used on the standard seats Made to fit and complement the Z651 RS motorcycle • Includes all necessary hardware
Tie-rod L=180 mm. Shorter. For adjustable footpeg LH 39111-0336 /Vulcan S Easy Reach Handlebar black with grip (36mm closer) 99994-0827 /Vulcan S Easy Reach Seat front (reduced reach seat) (ACC-0162) 99994-1559 /Vulcan S ERGO-FIT™ Reduced Reach (Suggested for riders shorter than 170cm. ) A combination of adjustable factory components and accessories reduce the reach to handlebars and footpegs for the best possible fit. Step1: Ergo-Fit 3 position footpegs can be adjusted 25mm closer to your body with shorter accessory tie rod, for maximum comfort and confidence. Step2: Ergo-Fit Accessory handlebar decreases reach by 36mm. Handlebar levers are positioned inwards for smaller hands. Original brake and clutch lever can be adjusted. Step3: Ergo-Fit The Easy Reach seat moves you forward ± 54mm. Additionally, the slimmer tapered seat profile allows the rider to reach the ground better.
This low seat is slimmer which makes it easier to touch the ground whilst standing still. For the MY17-MY19 Z1000SX it is 8 mm lower then the original seat. For the MY20-> Ninja 1000SX it is 29 mm lower then the original seat.
Help protect the tank paint finish from scratches and ordinary wear and tear Made with textured non-slip vinyl Adds stylish black accent to vehicle
Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip Adjust to low, medium, or high settings with the touch of a button Indicator light on the left grip improves setting visibility Grip Heater Set with all required wiring, brackets and hardware
Genuine plastic handguards to increase protection and comfort. Comes as a set; left and right.
Grip Heater Set replaces stock grips and throttle Requires Relay Kit (99994-1678) sold separately
Comfort Seat provides long-distance support and comfort for rider and passenger Gel insert evens out seating pressure Stylish carbon fiber pattern Complete replacement of the stock seat Uses factory seat base and components for a factory fit
Made to fit and complement the Ninja® ZX™-5RR motorcycle, this seat features firm urethane cushioning which enhances feel to the rear wheel traction during sport riding sessions Utilizes factory seat base and components for a factory fit Includes all parts needed to replace the stock seat
ERGO-FIT Reduced Reach Seat reduces the seat height by 20mm (.79") and has a narrowed front The seat vinyl is the same cold-resistant, high-elasticity-type material used on the standard seats Made to fit and complement the Eliminator motorcycle Includes all necessary hardware
Give your passenger additional comfort with this classic style Passenger Grab Bar Made from chrome plated steel Includes all required hardware
Give your passenger additional comfort with this classic style passenger grab bar Made from durable chrome plated steel
Made to fit and complement the Ninja 500 motorcycle, this seat enhances riding comfort for taller riders The ERGO-FIT extended reach seat is 25mm (2”) taller than stock and comes fully assembled Utilizes factory seat base and components for a factory fit PVC foam with vinyl cover Includes all parts needed to replace the stock seat
Hand cover set 99994-1135 /Versys 1001 Genuine plastic handguards to increase protection and comfort. Comes as a set; left and right.
Keep your hands warm on the road with an ergonomically designed heat system to minimize added bulk to the grip Adjusts between low, medium and high settings with the touch of a button Indicator light improves setting visibility Rubber grips with metal brackets Grip set with all required wiring, brackets and hardware
Up and down quick shifter. Standard for Versys 1000 S and Versys 1001 SE Requires dealer support with KVCI tool to enable quickshifter in bike ECU. Please ask your local dealer.
Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip Adjust to low, medium, or high settings with the touch of a button Indicator light on the left grip improves setting visibility Grip set with all required wiring, brackets and hardware
ERGO-FIT™ low front seat that is 20mm lower than the original seat. It will give an easy reach to the ground. (Total seat height with this seat is 801mm)
